Sentence examples for feed rotation from inspiring English sources

The results showed that feed, rotation, rock mass index and iron oxide percent have important effect on penetration rate.

Numerical simulations showed that the heat transfer is strongly influenced by the electromagnetically driven and Marangoni convections whereas both the buoyancy and feed rotation have a negligible effect.

The scan parameters were as follows: number of slices, 64/rotation; individual detector width, 0.6 mm; effective spatial resolution, 0.4 mm; 120 kV, 120 mA/s (900 mA/s for the ECG gated scan); feed:rotation, 58 mm/pitch:1 (11.52 mm/pitch:0.2 for the ECG gated scan); effective reconstructed slice thickness, 0.6 mm; and reconstruction increment, 0.4 mm.

This paper briefly introduces ongoing research on void detection by using the roof bolter feed and rotation pressure.

The paper addresses the influence of the significant process parameters (feed rate, rotation speed, temperature, wall thickness reduction and forming time) on the grain structure refine-ment during flange forming.

Scans took about 12 s in spiral mode with 16 × 0.75 mm collimation and 15 mm table feed per rotation (pitch = 1.3).

Other scanning parameters were set: 1.25 mm collimation, 3.0 mm thickness, 1.5 mm recon increment, 12.0 mm table feed per rotation and 512 x 512 pixel resolution.

Other scanning parameters were set to 1.5 mm of recon increment, 1.25 mm of collimation, and 12.0 mm table feed per rotation.

A four-row multislice CT scanner (Somatom, Volume Zoom, SIEMENS) set with fixed scanning parameters of 3 mm slice thickness, recon increment of 1.5 mm, collimation of 1.25 mm, 12 mm table feed per rotation, 90 mAs and 120 kV were used in this study.

MRT and the hold-up are measured under various feed rates and rotation speeds.

The hold-up shows a near-linear increase with the mass of feed per kiln rotation.