Sentence examples for feed flux from inspiring English sources

Influencing factors of feed flux, feed temperature in lumen side and vacuum pressure in shell side were tested and analyzed with orthogonal test.

However, experience shows that existing mathematical models underestimate dewatering in thickeners for flocculated feed materials when predictions are made of either the underflow solids concentration for a given solids feed flux density or the maximum solids feed flux density achievable for a minimum underflow solids concentration set point.

The optimal operating parameters (feed flux, feed pressure) and design parameters (internal diameter, total number of tubes) are determined by solving the optimisation problem using an efficient successive quadratic programming (SQP) based method.

The experiment is operated in wider parameter region, such as CH4/CO2 from 3/7 to 6/4, input power from 49.50 W to 88.40 W and total feed flux from 360 mL/min to 4000 mL/min.

The results showed that permeation flux of water vapor increased with the feed temperature increasing and the feed flux increasing in lumen side, and the permeation flux also went up along with absolute pressure drop in shell side.

The steady state of a continuous cylindrical thickener was simulated using the solid feed flux density function, the critical concentration, the solid effective stress and the required underflow concentration as input, in addition to the solid and fluid material densities.

Our results clearly demonstrated that both draw and feed fluxes were not well predicted with the solute permeability (B) measured by RO mode experiment, typically employed in FO membrane characterization.

Photons, carbon dioxide and glucose are independent feed fluxes in this simulation.

The simulations reported here are focused on the response of foraminiferal populations to environmental feeding fluxes.

The initial feed water flux of modified membranes increased up to 53% when compared to that of the pristine PVDF membrane.

After first cell testings in a steady state mode, effects of changed amounts of feed water flux on the cell voltage, the distribution of current density and the temperature profile were investigated.