Sentence examples for feed directions from inspiring English sources

In this work, the modular process simulation approach is expanded to simulate the FB-based hydrogen production with opposite feed directions.

In this method, the preferred feed directions on the surfaces are mapped into the corresponding parameter domains, and for the vector field on each parameter domain, a stream function which is a polynomial with B-spline basis is reconstructed to represent the vector field and is used to produce the streamlines along these preferred feed directions.

In order to verify the effectiveness of the approach, the transfer functions of a typical cutting system in a vertical CNC machine centre were measured in both normal and feed directions by an instrumented hammer and accelerometers.

The vector field based tool path method can conveniently generate the desired tool paths according to the preferred feed directions which reflect the machining intent of the designers at CC (cutter contact) points, thus recently, it has become the focus of interests.

The results show that Random Forest ensembles provided the highest accuracy with a statistical advantage over the other machine learning models; they achieved a final accuracy of 0.95 mm for the critical depth and 7.3 Hz for the chatter frequency (RMSE) in the whole working volume and in all feed directions, applying a 10 × 10 cross validation scheme.

In the characteristic helical machining and feed directions in drilling, the strength and failure behaviour of the composite is dominated by the mechanical properties and failure mechanisms of the matrix, which explains the significant impact of resin on the cutting forces.

In each zone, the variation of the steepest slope direction is lower, total path length is minimized and the feed direction is near the optimal feed direction.

Therefore, high stiffness, which affects the machined surface directly, is required particularly in the feed direction.

The path length depends on the feed direction and the surface topology.

It is the plastic deformation of workpiece material at a direction opposite to the feed direction [9].

Cutting tool feed direction and the radius of curvature ρ along the workpiece surface is shown in Fig. 7a.