Sentence examples for feed angle from inspiring English sources

This work presents a variant of the feed angle method (Kraemer et al., 2011), which applies to single- and double-feed reactive distillation columns.

Two novel thermodynamically sound shortcut methods, the feed pinch method (FPM) and the feed angle method (FAM), are proposed to resolve the limitations of existing methods.

First, the model piercing mill is designed and fabricated, and then the effects of the cross-angle and feed angle on the strain components are clarified.

The optimal cladding conditions in the experimental range were obtained at 0 mm of the powder feed position, 50° of the powder feed angle, 0.62 g/s of the powder feed rate and 6.7 mm/s of the travel speed.

The current article presents a novel reformulation of the previously introduced feed angle method, which represents a geometrical shortcut method that is based on a direct calculation of characteristic pinch points.

It was found that the powder feed position, powder feed angle, powder feed rate and travel speed had significant effects on the deposition efficiency, but the shielding gas type, laser pulse shape and focal position had nearly no effects.

The deposition angle is found to be critical in the case of wire feeding and the characteristics of different feed angles are explored.

The feed table was equipped with recesses at varying distances to the feeding barrier (5 55 cm in 5-cm steps) at angles of 30°, 60°, 90°, 120°, or 150° (feeding angle), which were filled with the goats' preferred food.

Assuming air at atmospheric pressure at the feeding angle and ignoring airflow through the gap, predictions of air pressure as a function of the rolling angle for bentonite material powder are presented and discussed.

For example they feed on the bottom of the substrate with a fixed feeding angle that is different from surface fish and that is more efficient, and they show an increased and continuous swimming/exploratory behavior.

Four process parameters, namely, cutting speed, feed, point angle, and clearance angle were identified and each parameter was investigated at three levels to study the nonlinear effects of process parameters.