Sentence examples for fatigue mode from inspiring English sources

I wasn't in fatigue mode.

The lowest fatigue strengths were obtained in the basal-slip-dominated fatigue mode.

Results show that visual image processing is a stable technique for facilitating the post-processing of static and fatigue mode I tests.

There is evidence for both the damage predicted and the fatigue mode of failure so that the approach may provide a basis for predictive methods for use in epidemiology and standards.

The purpose of this work is the study of the mechanical behaviour in 3-point bending, in static and fatigue mode, of two different composite sandwiches laminate foam with unidirectional reinforcements and crossed SMS [04] and SMS [0/902/0].

FCGC has not been used to the same extent for rubber components, even though rubber components are often employed in dynamic rather than static applications, for which fatigue mode of failure should be used as the criterion in analysis and design.

Based on the two main stages of fatigue failure (crack initiation and propagation stages), the influences of grain size on fatigue strength exponent and fatigue strength in the HCF range under the two fatigue modes are comprehensively analyzed.

The convergence of corrosion fatigue crack growth rates at high ΔK in both spray-formed and conventional plate materials coincides with the operation of identical transgranular corrosion fatigue modes dependent on strain-controlled hydrogen diffusion ahead of the crack tip.

The analysis also shows that the relative ratio of monotonic to fatigue modes varies with load ratio, R. At low load ratios, due to low Kmax value, the crack-growth process is predominantly fatigue-dominated, while at high R-ratios due to high Kmax value crack growth is fracture-dominated.

Now, in laboratory tests the double-cantilever beam (DCB) test, using a typical carbon-fibre reinforced-plastic (CFRP) aerospace composite, is usually employed to obtain fracture-mechanics data under cyclic-fatigue Mode I loading.

Activities toward standardization of fracture mechanics tests on carbon fiber-reinforced polymer-matrix (CFRP) composites have recently focused on cyclic fatigue under mode I (tensile opening), mode II (in-plane shear) and mixed-mode I/II loading.