Sentence examples for fatigue configuration from inspiring English sources

Fretting fatigue configuration involved cylindrical pads on the flat specimen.

In the present paper, the novel critical direction method by Araújo et al. and the multiaxial critical plane-based criterion by Carpinteri et al. are combined together to estimate early crack orientation in configurations involving high stress gradients, as fretting fatigue configurations.

Half of the specimens were submitted to monotonic loading up to failure, and the other half were submitted to a fatigue load configuration of 1-million cycles and then subjected to a monotonic loading up to failure.

For most common fatigue test configurations there are equations that allow calculating the stress intensity factors (SIFs).

In order to evaluate the impact fatigue strength, both configurations were submitted to multi-impacts, until the full perforation occurs.

It was also found that life prediction from one loading configuration (static fatigue) to another (cyclic fatigue) in the exponential formulation resulted in a similar degree of accuracy as compared with that in the power-law formulation.

The analysis of failure surfaces allowed identifying different heterogeneities at the origin of the fatigue damage for each configuration.

Under extreme loadings, a curved structure might undergo snap-through buckling, i.e., the structure is forced to its inverted configuration, inducing fatigue.

The experiments specifically considered two ply drop configurations and fatigue loading frequencies of 0.5 15 Hz.

A parametric study is conducted to validate the performance of these composite configurations with fatigue loads of 60%and80%0% of the rupture load over 100 cycles.

The influence on the crack growth behaviour of a short edge crack under fatigue due to different configurations of a nearby located low angle grain boundary is investigated under quasi-static and plane strain conditions.