Sentence examples for failure test from inspiring English sources

Two kinds of model tests are simulated: one is loading failure test and the other creep failure test.

This behavior was observed regardless whether a static or cyclic failure test was applied.

This work presents the cyclic shear cooling failure test (CSC-failure test) as an alternative method based on a failure test with the dynamic shear rheometer (DSR) at decreasing temperature until fracture occurs.

Anchors were tested under physiologic loads for 500 cycles followed by a failure test.

The overhand throw had the worst characteristic in the load to failure test.

In this paper finite element (FE) analyses on the VTT IRSN flexural failure test are described.

After such a failure, tests are not conducted at higher speeds.

Criteria for failure were the same as used for the axial loading failure tests.

Static compression load to failure and load-controlled cyclic fatigue failure tests were performed.

Table 4 Summary of fatigue failure tests (groups 1, 2 & 3): max.

The pullout strength for each screw was determined by axial pullout failure testing.