Sentence examples for failure of specimens from inspiring English sources
Open image in new window Fig. 6 Failure of specimens.
The specimens were testing under displacement control, where a 1.25 mm increment was used until the failure of specimens.
Failure of specimens was characterized by both fiber fracture and pullout.
And failure of specimens was mainly occurred by crack growth initiated from porosities within the veneering porcelain.
Experimental results show that the interaction of shear force and bending moment causes the failure of specimens.
The failure of specimens at −5 °C was mainly due to freezing-thawing and salt scaling, resulting superficial damage.
As load increases, cracks are continued to propagate till complete failure of specimen.
The failure of specimen PC-CRS and formation of crack pattern are shown in Fig. 13.
The comparison between the performance of specimen (WSB) and (ESB) was influenced by the early failure of specimen (ESB) due to shear.
Compressive toughness index (CTI) is defined as area under the stress strain curves under compression, which is the energy absorbed prior to complete failure of specimen as shown in Fig. 5.
Secondly, there is a slight load pick-up and subsequent flexural failure of specimen (region B to C). Open image in new window Figure 17 m-k Curve from experimental test results.
