The present test results are compared with other available data from the literature on igneous rocks to understand the influence of loading rate on Deccan Basalt in terms of the peak failure stress, modulus of elasticity, deformation modulus, and strain energy.
The effect of the rubber content on the compressive and flexural strength, failure mode, modulus of elasticity and toughness of RSRAC was analysed.
The effect of strengthening on in-plane shear behaviour of URM walls, including failure modes, modulus of rigidity, shear strength, maximum drift, and pseudo ductility, are investigated.
Single edge notched tension graded ECO specimens possessing different spatial variations of Young's modulus, failure stress and failure strain were tested under remote opening loading.
The ultimate load (UL), the energy to failure, and the modulus of elasticity (E-modulus) were recorded and analyzed using built-in software (QMAT Professional; Tinius Olsen, Inc., Horsham, PA, USA).
Also, an increase in urea-formaldehyde resin in the mixed slurry led to an increase in the failure strain, the modulus of elasticity and the secant modulus.
No significant differences were measured in burst pressure, suture strength, failure load, elastic modulus and failure strain according to the cell type used to produce the TEVS.
Tensile test is conducted to obtain in-plane mechanical properties (tensile strength, failure strain, tensile modulus and Poisson's ratio).
Fundamental trends are established between the network chemical structure, crosslink density, glass transition temperature, rubbery modulus, failure strain, and toughness.
Consequently, the engineering properties of soils such as permeability, water content, stress strain behavior, failure strength, elastic modulus, cohesion, and friction angle may be changed.
The stress-strain curve, failure strength, elastic modulus, cohesion and angle of internal friction were measured for samples before and after the freeze-thaw cycles.
