Sentence examples for failure loading from inspiring English sources

The quality of the corresponding failure loading estimates is assessed through the comparison with the values yielded by shell finite element simulations.

The influence of stress triaxiality and Lode parameter on microvoid growth phase of ductile fracture under ultra-low cycle fatigue (ULCF) (Nf < 100, Nf = cycles to failure) loading is investigated using micromechanical analyses.

The application of 40% failure loading to the summer stem bending treatments gave stem deflections that were similar to the spring stem bending treatment at the 30% failure loading (Table 3, Figure 3).

Figure 3 Tree stem profiles of the first winches in the prevailing wind direction to 30% and 40% of the failure loading (Fmax).

Despite pilot testing to reduce tendon-clamp interface failure, loading of 7 out of the 19 specimens lead to pull out from the clamp.

The spring stem bending treatment showed larger stem deflections, compared with the summer water-stressed treatment, at the 30% failure loading.

The bonding failure load was then measured at a loading speed of 1 mm/min.

As no static failure load data were available, the failure load of the antero-superiorly loaded specimens was estimated to be between the vertical failure load (7,273 N) and the anterior failure load (1,728 N).

Their failure load are then predicted theoretically.

The experimental failure loads averaged approximately 115% of the theoretical failure loads.

Similarly, the tensile failure load and normalized failure load demonstrated significant maturational increases.