Sentence examples for failed welds from inspiring English sources

They said they had also detected shoddy attempts at repairs, like incomplete or failed welds.

During the monthlong manslaughter trial in New York of James F. Lomma, whose company owned the crane, which collapsed and killed two workers on the Upper East Side four years ago, there has been ample testimony about the failed weld on the turntable that led to the collapse, and how the Chinese company was unable to satisfactorily perform a vital weld on the turntable.

Due to a failed weld, a steel cable snapped from a car being towed and hit the extra's car, damaging her skull.

It is shown that springback and the number of failed spot welds after forming can be reduced by stress relief annealing and appropriate forming conditions.

The specimens cut from coupons with shorter weld lengths failed near the weld root whereas the specimens cut from coupons with longer weld lengths failed near the weld toe.

Two distinctive failure modes were observed; (a) at maximum fatigue loads at and above 1500 N, the welds failed due to interfacial failure through the weld nugget and, (b) at maximum fatigue loads below 1500 N, the welds failed due to kinked crack growth through the top aluminum sheet.

All the weld joint specimens failed in the weld metal.

Keep welding more scrap steel if your welds failed the test described above.

Fatigue specimens containing weld failed at both base metal and in the weld indicating that there is some competition between weld cyclic fatigue strength and stress concentration effect at the weld fusion zone.

Tanks designed to fail at the roof/wall weld have failed at the base/ wall weld because this weld was corroded or fatigued or because holding-down bolts were missing.

Scanning electron and optical microscope images of the failure surfaces and cross sections showed that the gas metal arc welds failed in a ductile necking/shear failure mode.