Sentence examples for fabrics as a function of from inspiring English sources

The work presented in this article puts forward and validates a method for inductively measuring the equivalent electrical conductivity in thin dry multilayer carbon fibre fabrics as a function of the fibre volume fraction by varying the applied pressure on the fabric.

Nickel phosphorus/copper nickel (Ni P/Cu Ni) multilayers are electroless deposited onto polyester fabric as a function of the deposition time of Ni P and compared with Ni P and Cu Ni deposits.

Table 4 lists the electrical properties and its durability after fastness test for Cu Ni P Ni nanocomposite electroless plated PET fabric as a function of temperature and pH.

Probabilistic velocity response curves which describe the probability of fabric penetration as a function of projectile impact velocity are generated for each projectile type through a series of forty impact simulations at varying impact velocities.

Forty impact simulations are used to generate a probabilistic impact response (PVR) curve for each test case, describing the probability of fabric penetration as a function of projectile impact velocity.

A probabilistic velocity response (PVR) curve, which describes the probability of fabric penetration as a function of projectile impact velocity, is generated through a series of thirty impact tests using a spherical steel projectile impacted at velocities between 69 and 113 m/s.

The cesium adsorption on the composite adsorbent based on the KNiHCF-loaded PP fabric was studied as a function of contact time, pH, and the presence of competitive sodium ions.

In addition, Table 2 also summarizes the fabrics which show laundering durability as a function of an adequate surfactant or a specific pretreatment to enhance the adhesion of the nanoparticles onto the fabrics surface.

The cryogenic interlaminar shear strength (ILSS) at cryogenic temperature (77 K) of glass fabric (GF /epoxy composites is investigated as a function of the graphene oxide (GO) weight fraction from 0.05 to 0.50 wt% relative to epoxy.

c Plot of UPF values of silk fabrics treated with 0.5 mM HAuCl4 as a function of pH value.

However, the results demonstrate the linkage between pore fabric and relative permeability end points, and may ultimately permit one to extrapolate those properties as a function of depositional fabric.