Sentence examples for fabrication deviation from inspiring English sources

More importantly, the sensitivity is not sensitive to changes of structure parameters, which means that the sensitivity of the sensor is immune to the fabrication deviation.

Since the side sticking effect will become obvious and exhibit strong impact on actuator behavior in the case that the spring lateral stiffness is decreased when the static displacement is increased, and the rotation moment caused by unbalanced force between electrode fingers resulted from the environment disturbance and/or fabrication deviation will enhance the side pulling phenomena.

Moreover, if in the case that the width is larger than 150 nm which results from the fabrication deviations, the performance will get better rather than worse.

The guiding properties of the AHPMW waveguide as functions of its width and the position of the metal nanowire are presented in Figure 4 to get insight into the influence of fabrication deviations on its guiding properties.

Finite element simulations are used to model the bump foil forming process that would present potential problems during fabrication, suggesting sharp bends in the bump foil as the main driver for manufacturing deviations.

From the point of fabrication, the influences of deviation of each air hole diameter are discussed to verify the robustness of the photonic quasi-crystal fiber designed.

From the point of view of practical fabrication, the influence of deviation of each air hole diameter within 3% of imperfections on dispersion, nonlinearity, and is discussed to verify the robustness of our design.

Due to the deviation of fabrication and installation, the detector usually receives the radiation from the different regions of the measuring cavity, so the local effective emissivity distribution is an important parameter to evaluate the measuring temperature discrepancy of a blackbody cavity sensor.

Two new metrics were developed to quantify the two conflicting objectives of panel platform design: total fabrication cost (TFC) and design deviation index (DDI).

However, fabrication processes usually introduce serious deviations from simple ideal spatial arrangements of preform fibres and matrix.

Because fabrication of laminates is sensitive to deviation of eigenstrain magnitudes, as shown from stochastic study, an additional minimization of the eigenstrains is introduced.