Sentence examples for fabricating end from inspiring English sources
A solid model of the designed cutter is constructed together with the computation of the cutter's geometry, wheel geometry, and wheel positioning data for fabricating end mills with the required cutter geometry.
After fabricating the end plates, a single cell was assembled and electrochemical impedance spectroscopy (EIS) tests were carried out to ensure their good operation.
In all cases, the failure mode was by shear bond even in the slabs fabricated with end anchorage and ribbed sheeting.
Wrought metals are initially cast into ingots or billets and then converted by mechanical working and forming processes into distinct product forms that may be fabricated into end products.
Large state-owned companies dominate the production and supply of plastics materials, heavily influence plastic product design, and fabricate numerous end-use plastic products.
Because the material used to fabricate the ends is T5 tinplate, the tearing process was simulated on this material by manufacturing two parallel notches of different residual thicknesses, with the objective of obtaining a correlation between this parameter and the tearing load.
In conclusion, waste valorization approach has dedicated a new pathway to apply sustainable lignocellulosic waste material to fabricate advanced end-products using green chemical technologies.
As depicted in Figure 2, a CNT nanoneedle electrode was successfully fabricated on the end of a tungsten tip and an AFM tip.
The guide tube was directly patterned and fabricated at the end of the detection reservoir, which made the fixation and alignment of working electrode relatively easy.
An EoN (electrochemical impedance spectroscopy-on-a-needle) with bipolar interdigitated electrodes fabricated at the end of a curved surface of a hypodermic needle has been introduced to electrically discriminate biotissues.
Standard block supports of varying height were fabricated and peripherally end milled to study deformation and fracture behavior, specific cutting energy, the influence of tooth-support wall interactions on milling forces, and tool wear.
