Sentence examples for fabricated joint from inspiring English sources

The unique features of this design are that it is fluxless, oxidation-free, and more importantly the fabricated joint achieves a re-melting temperature significantly higher than the bonding temperature.

The functionally graded material system containing the integrally fabricated joint between the monolithic titanium alloy and the titanium matrix composite provided the expected performance, i.e., it performed at least similar to its weakest link, i.e., titanium alloy, and it has potential to provide the practical benefits of cost, durability etc.

Lastly, we set out to determine the re-melting temperatures of these fabricated joints.

The total fatigue life of the test specimens complies with the life estimation based on the existing design S-N curves, originally developed for tubular joints fabricated using the complete joint penetration welds.

Meanwhile, in treating infected arthroplasties, elution efficacy of the antibiotics is most important when ALBC is used for fabricating the joint spacer.

However, the adopted modifications provided tensile failure loads over 1875 N and 1270 N for the joint fabricated by using double-layer carbon and glass fabric reinforcements, respectively.

Based upon the test results, an increase of 33.6% in the failure load at room temperature is obtained for the joint fabricated by the addition of double-layer glass fabric reinforcement in the bonding surface.

The joint fabricated using water cooling medium recorded marginally higher hardness in all the regions than the joint fabricated under air cooling medium.

Because of high heat input and slow cooling rate, the joint fabricated using air cooling medium reveals marginally larger grains and wider stir zone than the joint fabricated using water cooling medium.

2) The UWFSW-TTC joint fabricated using taper threaded pin profile with water cooling exhibited tensile strength of 345 MPa and joint efficiency of 76 %, which is 5%% higher than UWFSW-THC joint, 29%% higher than FSW-THC joint and 22%% higher than FSW-TTC joint.

Multi-material components were fabricated and the joint interfaces were characterized.