Sentence examples for fabricated at different from inspiring English sources

PhOLEDs were fabricated at different dopant concentrations and the best device performances were obtained in the device with 8 wt.% dopant concentration.

New ICRF (Ion Cyclotron Range of Frequency) antennas, targeted to reduce impurity generation in the all-metal ASDEX Upgrade were designed and fabricated at different sites in an international cooperation between IPP, ASIPP (Hefei, China) and ENEA (Frascati, Italy).

These SiCF/MgCo2O4 electrodes were fabricated at different MgCo2O4 feeding ratios to determine the optimal MgCo2O4 amount for both total surface area coverage and a suitable redox reaction rate by maximizing the synergy between the electric double layer capacitive effects of SiCF and the Faradic reaction of MgCo2O4 nanoneedles.

In this report, freezing dry APCS (FD-APCS) biomaterials containing pores with different sizes were fabricated at different pre-freezing temperatures of −10, −80 or −198 °C, and the percentage of large pores (equivalent circle diameter ≥ 10 μm) was 93.55%, 69.36%, 35.79%, while the small pores (<10 μm) were account for 6.45%, 30.64%, 64.21%, respectively.

Meanwhile, the bending resistance of printed prism specimens fabricated at different paste ages was tested.

Figure 2f h shows the different surface structures of nano-MnO2 fabricated at different temperatures.

FTIR measurements with nanofibers fabricated at three different electrospinning distances, but under the same electric field intensity, revealed an enhanced molecular orientation only for the longest electrospinning distance.

Figure 2b shows the OM images of the NWs fabricated at three different tip retraction speeds (2 μm/s, 500 nm/s, and 10 nm/s), where fast (slow) pulling produces phase-1 (phase-3).

Its components were fabricated at three different plants so that no one would have a copy of the complete design.

Figure 3 SEM images of the as-obtained products fabricated at 140°C with different reaction time.

Vibration amplitude and eccentricity ratio have been examined for all the fabricated dampers at different shaft rotational speeds.