Sentence examples for extraction at high temperature from inspiring English sources

She suspected that extraction at high temperature destroyed the active ingredient of qinghao.

However, prolonged extraction at high temperature may degrade the 6-gingerol and 6-shogaol compounds, and involves high energy cost.

Pansera et al. (2004) used the process of hydrosolubilisation at 100 °C for the extraction of tannin and found that the extraction process at high temperature motivates a hydrocracking of sugar and other organic compounds with darkening of the final product.

These include pre-extraction incubation at high temperature; optimal digestion temperature; long (48 h) duration of digestion; silica-based extraction; DNA repair using Taq polymerase; and hot-alkali extraction.

The main strategies adopted for hollow nanofiber synthesis via electrospinning are as follows: (1) Coaxial electrospinning involves the use of two coaxial capillaries in a spinneret containing different solutions to generate core-shell composite fibers that results in hollow fibers via removal of core fibers by extraction or calcination at high temperature [17,18].

In general, the results of the phenolic and flavonoid contents indicated that these compounds were present at lower amounts in the aqueous extracts but could be explained by the fact that these extracts were obtained at high temperature of extraction.

Decreasing the flavonoid concentration in the extract at high temperatures by ultrasound-assisted extraction could be related to the degradation of these compounds at higher temperatures (>56°C).

By applying back-extraction at higher temperature, at atmospheric pressure and T=373 K with wash/extract ratio (W/E)=5.4, the initial 0.013 mol/L could be concentrated to between 0.041 mol/L and 0.078 mol/L lactic acid (concentration factor ranging from 3.15 to 6.06).

In order to achieve the maximum possible concentration in the extract, extraction was performed at high temperatures and columns were connected consecutively in a series.

The desiccant must be certified to be free of analyates, e.g., by heating at high temperature in the case of sodium sulfate or pre-extraction (Celite; Hydromatrix).

Borehole stability at high temperature and high in-situ stresses is the key to Hot Dry Rock geothermal energy extraction.