Sentence examples for extraction air from inspiring English sources

Finally, a design optimisation of the extraction air ratio was conducted under different ambient conditions.

It was found that, although heat extraction, air preheat, excess air, firing rate, dilution, and fuel type all affect global NOx emissions, they do not control NOx scaling.

It was found that the optimal extraction air ratio decreased with the ambient temperature and/or relative humidity which ranged from 0.3 to 0.36.

Thermal field measurements are presented for cases with and without combustion air preheat, in addition to global temperature and emission measurements for a range of equivalence ratio, heat extraction, air preheat and fuel dilution levels.

Proteinase K was added to digest protein and DNA was subsequently purified using ethanol extraction, air dried, and redissolved in 100 µl H20.

Prior to extraction air samples were spiked with surrogate standards containing 3,5-dichlorobiphenyl (PCB14), 2,3,5,6-tetrachlorabiphenyl (PCB65), and 2,3,4,4′,5,6-hexachlorobiphenyl (PCB166).

For the particular application of solar surgery, dielectric second-stage concentrators were designed and fiber tips were sculpted to boost flux concentration by a factor of 2 to 4, for light extraction into air and tissue, respectively.

A single ultrasonic-assisted extraction of air particulate matter is performed in 0.01 M acetate buffer at pH 4.5, followed by IC ions analysis and ICP-OES elemental analysis of the extract and by ICP-OES elemental analysis of the mineralized residue after dissolution by microwave-assisted digestion with a HNO3/H2O2 mixture.

Ozone and nitric oxide levels are moderate, but exposure duration, repeated exposure, and the quality and quantity of fume extraction, and air change in the room must be monitored.

The solids after extraction were air-dried, extracted by dioxane/water solution (96:4 v/v) for 48 h at room temperature, and air-dried.

For quantitative analysis of insoluble PAs from cacao tissues, the residues from soluble PA extractions were air dried in an exhaust hood for two days, weighed, and 5 mL butanol-HCl reagent (95% butan-1-ol: 5% concentrated HCl) was added and the mixture was sonicated for one hour followed by centrifugation at 2500 g for 10 min.