Sentence examples for extracting time from inspiring English sources

As results, the optimum conditions were extracting temperature 80 °C, extracting time 4.5 h and the ratio of extraction solvent (water) to raw material (v/w) 8.

Supercritical fluid extraction (SFE) using carbon dioxide is a popular technique for oil extraction due to its high extraction efficiency, short extracting time, lower refining requirement and absence of chemical residues or contamination in the extracted oils.

The optimal extraction conditions for the Se-enriched H. erinaceum polysaccharides were: extracting time 115 min, extracting temperature 98 °C, ratio of liquid to solid 4, and extracting number 4. Compared with untreated cells, administration of Se-enriched H. erinaceum polysaccharides improved BMC and BMD in experimental rats.

The optimum conditions were predicted as follows: extraction temperature 71 °C, extracting time 31.4 min, and ratio of water to raw material 42.

As results, the optimal parameters for extraction of PHMPs were obtained by a Box Behnken design as follows: extraction temperature 92 °C, extracting time 190 min and ratio of water to material 43 mL/g.

The optimal extraction parameters of PRG were as follows: extracting time 4 h, extraction temperature 77.3 °C and liquid-solid ratio 42.5 g/L.

A four-factor-three-level Box-Behnken design (BBD) was employed to discuss the following extracting parameters: extraction time (X1), ultrasonic power (X2), solvent to sample ratio (X3) and solvent concentration (X4).

The maximum extraction efficiency of piazselenol was obtained at 20 μL of 1-octanol as the extracting solvent, 30 min extraction time, pH 2, stirring rate of 500 rpm and 30% (w/v) NaCl.

SHLPME parameters including nature of extracting solvent, headspace volume and design, extraction time, sample weight and microdrop volume were optimized.

There are number of advantages of SCW extraction over traditional extraction techniques used, such as higher quality of the extracts, lower extraction times, lower costs of the extracting agent, and an environment friendly technique (Joana Gil-Chávet et al. 2013).

Data analysis results showed that the optimal conditions for extracting LEPs were an extraction temperature of 45 °C, extraction time of 21 min and ultrasonic power of 290 W.