Sentence examples for experimental speed from inspiring English sources

Thus, our experimental speed indicates that the proposed method can support embedded systems positively in this aspect.

The experimental isentropic efficiency increases with the speed ratio, and it reaches 78.8% at the largest experimental speed ratio.

Open image in new window Fig. 15 Simulated test runs (different launching speed and motion sense) with emergency braking Open image in new window Fig. 16 Experimental speed profiles measured on ten braking test runs (different launching speed and motion sense) with emergency braking.

Unloaded birds were found to walk comfortably for over 10 minutes at 0.42 ms−1, which was then used as the experimental speed for subsequent loading trials.

For the virus dynamics, we obtain results consistent with the in vitro experimental speed data only when applying the more complex and comprehensive model, with time-delay effects both in the reactive and diffusive terms.

As interference optics were used to record data, the laser delay, fringe contrast and brightness at the experimental speed were adjusted before the run to obtain high-quality fringes.

Setting the typical parameter values previously used in Fig. 2 (bold curves) and Fig. 3 for D VSV, D GBM, k, k3 and the average value τ=8 h (so k2=1/40 h −1), which yields results consistent with the range of experimental speeds (Fig. 2), we have varied the values of Y and k1 for each of both models.

Specimens C, E, and F use the same material (#3) with different rotation speeds, and the weight loss is seen to have a negative correlation with the experimental rotation speed.

The experimental Doppler speed spectra were converted into the spectra of the ion movements by applying the factor sin−2 φ, where φ is the magnetic dip angle.

The improved methodology is first described and validated through experimental wind speed data, comparing the results with those obtained using the basic model.

The results show that cutting forces and surface roughness do not vary much with experimental cutting speed in the range of 55 93 m/min.