Sentence examples for exit bulk temperature from inspiring English sources

The calculated exit bulk temperature of subcooled coolant and the maximum wall temperature at OFI show a maximum deviation from experiment of 12 and 7%, respectively.

Carbon dioxide bulk temperature at the outlet of the tube.

Closed-form expressions for the velocity and temperature distributions, as well as the bulk temperature, valid from the entrance to the exit of the die are presented.

θb: Dimensionless bulk temperature.

Thus, the bulk temperature was kept constant.

Therefore, more energy is required to increase the bulk temperature.

The comparisons are not only in the low bulk temperature region, but also in the high bulk temperature region.

Four T-type thermocouples were mounted on the test section at axial positions in mm of 298 (T1), 521 (T2), 748 (T3), and 858 (T4) from the inlet of the test section to measure the wall temperature distribution, and two further T-type thermocouples were inserted into the flow at the inlet and exit of the test section to measure the bulk temperatures of nanofluids.

Initially, design constraints of the cycle i.e. pump exit temperature, source exit temperature, cooling fluid exit temperature, and flue gases exit temperature are applied to check the ORC applicability.

Furnace exit gas temperature (FEGT) is one such important design/operating parameter.

In addition, discussions of peak and exit gas temperature trends are included.