Sentence examples for excessive beam from inspiring English sources
Adding web stiffeners and two tubes at the center of voids were effective in preventing excessive beam flange/web buckling.
As to prevent a premature connector failure due to excessive beam end slip, design codes usually allow only ductile shear connectors with a deformation capacity δult of at least 6 mm to be used.
An ideal specimen (a) should be free of contaminants such as ethane and ice crystals, (b) should have maximum number of particles within a field of view, yet the particles are sufficiently spaced, and (c) has a vitrified solution that is thick enough to contain the protein particles but thin enough to prevent excessive beam interference that reduces image contrast (Orlova & Saibil 2011).
The mechanism for the rupturing process is described by local defect formation by excessive irradiation of helium ions, dictated by the scanning direction of the beam.
We further observe that 3D GAs irradiated to the highest dose studied (1016 cm−2) fail rapidly upon electrochemical cycling, likely caused by the excessive ion-beam damage and graphene restacking.
Since the slippage effect becomes dominant, however, the FEL gain drops with the excessive short bunch beam.
Furthermore, this connection offers a high rotational capacity, if designed properly, which is beneficial in a fire situation where excessive deflections of beams can be expected.
The beam-type dynamic absorber is a new concept of a continuous dynamic vibration absorber (CDVA), which can be applied to suppress excessive vibrations of corresponding beam systems.
This controller applies the principle of optimal control to suppress excessive vibration of the beam when subjected to base excitation, thereby improving the system dynamic characteristics.
An annular plate designed to suppress excessive vibrations of clamped beams and clamped plates is described and optimum values of its tuning and damping parameters are specified in graphical form.
The introduction of magnetic coupling also enables the energy transfer between the two beams, which helps to restrain the excessive deflection of the two beams.
