Sentence examples for evaporator temperature from inspiring English sources

Process analysis showed that a quadratic model is adequate to describe methyl chavicol concentration using short path evaporation and that evaporator temperature was the unique statistically significant variable of the process.

Ionic liquid was quantified using reversed phase liquid chromatography using an HPLC equipped with Eclipse Plus C8 column and Evaporative Light Scattering Detector (ELSD, evaporator temperature = 45°C, nebulizer temperature = 30°C; gas flow = 1.2).

A mixture of the appropriate amounts of phospholipids and cholesterol was dissolved in chloroform and the solution evaporated to dryness under reduced pressure (20 mbar) on a rotary evaporator (temperature of the bath 30°C).

The effects of absorber/evaporator temperature, evaporator temperature, absorber temperature, and condensation temperature on the COP and COPΔT are investigated.

The evaporator temperature was 100°C and reactor pressure was 1 mbar.

The evaporator temperature was 100°C, and the reactor pressure was 1 mbar.

Also, increasing the evaporator temperature has a good effect on the heat transfer coefficient.

Therefore, its evaporator temperature can be risen by up to about 120 °C.

Thus, signal to noise ratio was significantly lower for low evaporator temperature setting.

The factors studied in this work were: evaporator temperature (Tevap) and feed flow rate (FFR).

The importance of LVHX increases with a decrease in both rectifier efficiency and evaporator temperature.