Sentence examples for etch until from inspiring English sources

In the second series of samples, we thus used this optimal EBL conditions and increased the RF power during etch, until the material redeposition around the holes was minimized.

The oxide-free regions were etched until the macropore tips were attained (cf. Figure 4b).

Next, the surface of the p-type GaN layer was partially etched until the n-type GaN layer was exposed.

Then, the surfaces of the UV-LEDs which were partially etched until the 1.5-μm depth of the n-GaN layers were exposed.

Etching time was optimized by plotting the etch time until hole formation as a function of initial sample thickness, along with plotting sample thickness versus etching time.

As shown in Fig. 4, the grain coalescence shows an overall increasing behavior with both increasing vertical and horizontal etching rate until the etch rate of 100 nm min−1 is reached.

Afterwards, the etch rate increased again until 15 min, albeit with relatively lower etch rate values.

Coating was followed by softbake, front-back alignment, development, and DRIE etch at 4 µm/min until the bulk of the back side had been etched through leaving only the buried native oxide layer.

A 3 minute reactive ion etching in CF4/O2 mixture was performed to etch the silicon nitride layer, until exposing the top of the nanotubes layer.

After an appropriate interval, the next strength solution is brushed on, and this continues until the strongest etch has coated the darkest areas.

The toy played an integral part in the life of Bryan, Ohio residents where, until 2003, the Etch A Sketch was built.