Sentence examples for etch the surface from inspiring English sources

Dry etching is a method in which a gaseous chemical etching agent is used to perform non-isotropic etching, but it is likely to destroy the surface and form defects. Wet etching uses a chemical solution to etch the surface of a semiconductor isotropically; the etching rate is a function of the temperature and concentration of the solution.

Dry etching was using reactive ions such as chloride ions to react with Cr as selectively etching, and also the ions physical bombardment was used to etch the surface of PMMA and Cr simultaneously.

After slipping, the droplets gain more mass, etch the surface, and are again bound by the slow-etching {111} planes.

He then used a small hammer and pick to etch the surface with geometric and animal patterns.

Subsequently an atmospheric pressure dielectric barrier discharge plasma is used to etch the surface to further nanostructure it.

The only acceptable place for bubbles to start is the centre of the bottom of the glass, and the manufacturers of posh glasses will etch the surface there to roughen it and make sure the bubbles start where they're supposed to.

Cell makers: At a factory in Wuxi, China, a machine that uses a novel process developed by Suntech Power etches the surface of crystalline silicon wafers for solar cells.

In either case, you might need to take the blame for not reading and following the instructions, which say to thoroughly scuff up the surface and wash with TSP (trisodium phosphate) or a TSP substitute, which etches the surface and removes wax and grease.

AFM analysis indicated that the DBD plasma homogeneously etches the surface of the amorphous PET foil resulting in smoother surfaces after plasma treatment, while for the more crystalline PET foil the etching effect is more randomly leading to rougher surfaces.

The laser perpendicularly irradiates on TiAlSiN through the fiber and etches the surface.

The presence of plasma radicals such as NHx and H further chemically etched the surface of the carbon nanotubes.