Sentence examples for estimates the received from inspiring English sources
In other words, the receiver estimates the received signal power level and carrier phase distortion through the RTS frame, and then broadcasts a CTS frame that includes the set of transmitters that are permitted to transmit and the transmit power level and phase shift information, thereby achieving low transmission error probability and high reliability.
When the receiver detects and decodes the RTS frame signals received from the multiple transmitters, it estimates the received signal power levels and the carrier phase offsets that occur when the compound signals are transmitted on a wireless medium.
When HeNB is turned on, it senses the neighboring macrocell signals and estimates the received signal strength indication (RSSI) value (R j ) for each frequency sub-band.
Each relay k itself estimates the received SINR on the first hop ξ ̄ k and computes ϕ k ( ξ ̄ k, t ).
Each UT sends information from the precoder W to the BS via the feedforward link, then BS estimates the received power to satisfy the transmit power constraint.
The choice of the filter to apply is controlled by an entity that estimates the received channel conditions and decides which filter is the most suitable to the channel conditions measured at the receiver.
Some power control techniques are also used to combat these effects; however, because the techniques are imperfect, the receiver needs to estimate the received power for each user for a proper decoding.
In the previous subsection, we have surveyed a class of codes for which we can handle the near-far effects without actually estimating the received power of each user at the receiver.
We assume that each receiver in a cell n can estimate the received power from each of the interfering stations (either the BS or a RS of an interfering cell).
Specifically, as the relays themselves estimate the received SINR on the first hop, our proposed order of optimization only requires the receivers estimate and send back the second-hop SINR to the relays to perform two-hop rate matching.
Next, values are calculated using Eq. (7) in order to estimate the received energy.
