Sentence examples for estimate the received from inspiring English sources

Some power control techniques are also used to combat these effects; however, because the techniques are imperfect, the receiver needs to estimate the received power for each user for a proper decoding.

As we assume that each receiver in each cell can estimate the received power from each of the interfering stations (either the BS or a RS of an interfering cell), both X nk, n ′ and Y nk, n ′ can be calculated locally in each interfering cell n′ for a considered cell n.

We assume that each receiver in a cell n can estimate the received power from each of the interfering stations (either the BS or a RS of an interfering cell).

Specifically, as the relays themselves estimate the received SINR on the first hop, our proposed order of optimization only requires the receivers estimate and send back the second-hop SINR to the relays to perform two-hop rate matching.

Next, values are calculated using Eq. (7) in order to estimate the received energy.

According to this, two methods to estimate the received signal level per user are evaluated.

For simplicity and without loss of generality, we could estimate the receiving UE i's approximate coverage D i according to the following formula (11).

To estimate the receive cone angle, we first construct selection matrices J 1 and J 2. J 1 = I N ⊗ I K − 1, 0 K − 1 × 1 (14) J 2 = I N ⊗ 0 K − 1 × 1, I K − 1 (15).

In the previous subsection, we have surveyed a class of codes for which we can handle the near-far effects without actually estimating the received power of each user at the receiver.

When the receiver detects and decodes the RTS frame signals received from the multiple transmitters, it estimates the received signal power levels and the carrier phase offsets that occur when the compound signals are transmitted on a wireless medium.

These methods depend on estimating the received power for each user.