Sentence examples for estimate interface from inspiring English sources

In this study, a model was proposed to estimate interface and matrix strength of composites and share in increasing tensile toughness and strength.

Although this relationship was initially derived from a theoretical model in which perfect CPE behavior was caused by a double-layer capacity distribution along the interface, it has been extensively used in the literature to estimate interface capacitance from CPE parameters in very different complex systems without any definitive evidence of it.

At each image acquisition they logged measurements of reservoir pressure which were used to estimate interface position at the time of imaging.

Of immediate practical interest is the observation that for estimated interface temperatures just above the melting point, non-isothermal bonding gave bonds with Gc approaching that of the bulk resin after much shorter times than isothermal bonding.

Comparison of the estimated interface position and the cell response can be used to evaluate device precision (Fig. 3).

Although the developed model can be used for estimating interface properties, it should be mentioned that the principal aims of this paper were to study the fundamental features of the strip tensile test and to explain the experimental observations by comprehensive theoretical considerations.

Knowing the matrix toughness, crack kinking angles at the copper chromium interfaces are used to estimate the interface toughness.

A new graphical procedure is proposed to estimate the interface resistivity in terms of interface mass-transfer coefficient (k) in gas oil pressure decay experiments.

Based on these results, a delamination criterion involving stress intensity parameter is adopted to estimate the interface toughness for crack initiation at the free edge along the interface Cr/PZT.

In order to calculate the theoretical DP value of the transitions of the QWs, we should first estimate the interface potential P0 for an ideal InAs-Al0.3Ga0.7As InAs-Al0.3Ga0.7AslAs-GaAs interfaces, respectively.

To estimate the interface bond densities for each in-plane epitaxial relationship[22], we consider the in-plane atomic arrangements at the ZnO/STO interface for the case of as-received and etched STO surfaces.