Sentence examples for erosion testing from inspiring English sources

The laser clad layers were characterised using optical and scanning electron microscopy, microhardness testing and air-jet erosion testing.

The scope of the study incorporated the application of cathodic protection to prohibit the effects of corrosion in the case of slurry erosion testing.

TiAlN coatings with different Al concentrations have been deposited on Ti 6Al 4V substrate by reactive magnetron sputtering and characterized by scanning electron microscopy, nanoindentation and solid-particle erosion testing.

Diamond coatings up to ∼60-μm thick have been grown by microwave plasma CVD (MPCVD) on sintered tungsten carbide (WC) substrates, and their erosive wear properties are investigated under high velocity air sand erosion testing.

A stirring device was also used for corrosion and erosion testing.

Erosion testing was performed at 90° and 20° using a particle speed of 65 m/s.

For pure erosion test, the slurry erosive agent was 4 l of water and an erosive particle concentration of 400 g/l.

To conduct erosion tests properly, the simulation of heavily erosive cavitation is necessary.

To study the effect of various operational and material parameters on erosive wear behavior of these composites in an interacting environment erosion tests are carried out.

Coatings were characterised before the erosion test.

Erosion tests were conducted in water and sand flux.