Sentence examples for equivalent power for from inspiring English sources

Each model has produced closed-form solutions for the detector's responsivity, dynamic impedance, and noise equivalent power for phonon noise, Johnson noise, amplifier noise, 1/f noise, and load resistor noise.

Hence, to also determine a "keratometric equivalent power" for SDOCT, we used the vertex power formula [ 23] with the appropriate ophthalmic variables: Additional detail regarding the scan protocol and post-processing algorithms can be found in Zhao et al. [ 16].

Electrical tests on the fabricated devices indicate a noise equivalent power of about 0.76 nW for 1 mm2 wide p-/n-polysilicon thermopiles, which makes such devices applicable in NDIR or PA-based sensing of relevant gases like CO, CO2, N2O or CH4 having absorption lines in the 3 5 μm wavelength range.

Two optimal load resistances for the maximal equivalent power of the hybrid system are obtained.

The receiver has a noise equivalent power of 1.1×10−24W/√Hz in the band of operation for an integration time of 1.8×103s.

The optimal equivalent power allocation for this case should satisfy widehat{P}_{S1}^{text{opt}} = gamma ;widehat{P}_{S2}^{text{opt}}, (38).

The equivalent power value for differences in birth weight, between fasting and non-fasting mothers, was 90% [ 10].

We also present a new optically based "keratometric equivalent power" formula for SDOCT that eliminates previously described discrepancies between corneal power form SDOCT and existing clinical modalities.

For this purpose, an equivalent power storm methodology is exploited for modeling the non-stationary time variability of the significant wave height.

The equivalent power output and efficiency for the hybrid system are specified under different operating current density regions.

For equivalent power dissipation, the volume oxygen transfer coefficient (KLa) could be enhanced by 15% compared with that of conventional impeller configuration.