Sentence examples for equilibrium of the force from inspiring English sources

Equation (7) establishes an equilibrium of the force.

Here, in most cases, the triceps brachii is taken into account for the equilibrium of the force around the elbow joint.

The model is based on the assumption of local equilibrium of the forces affecting the particle transport.

The transmission conditions are imposed, that express the continuity of the medium and the equilibrium of the forces acting on it.

After laboratory testing to quantify the interface friction, the data obtained were used in a model based on the equilibrium of the forces at failure.

The Detailed Equation is an equation that describes the equilibrium of the forces acting on a railway vehicle and has many parameters.

Similar to the design analysis of reinforced concrete beam, the hypothesis for the rigid-plastic equilibrium of the forces across the section is adopted for the analysis of the flexural strength of the retrofitted beam.

With the complete sensor layout used to calculate vertical and lateral components of the wheel rail contact forces (Q and Y), it is also possible to estimate the contact point position by imposing static equilibrium of the forces applied on the axle.

On the penetrable interfaces (S_{i} (i = 1, 2)), the so-called transmission conditions (1.4 - 1.5 1.4 - 1.5 constants (lambda_{1} > 0) and (lambda_{2} > 0) are imposed, respectively, withh representwohe constantsy of the medium and equilambda_{of the forces acting on them.

The formula to assess the initial shear strength is derived from the equilibrium of the forces acting on the primary shear failure plane and Mohr Coulomb failure criteria for concrete, while the degradation slope of shear strength is associated with a factor indirectly representing the contribution by the so-called dowel action of longitudinal reinforcements.

In the case of an inclined thrust, the equilibrium of the forces is: L u)+Tcdot sin t-W=mcdot frac{u^2}{R}=frac{W}{g}cdot frac{u^2}{R} (31)and Tcdot cos t-D u)=mcdot-D u_c=mcdotW}{a}_c=frac{_c (32).