Sentence examples for equilibrium of capacity from inspiring English sources

Reaction curves and equilibrium of capacity strategy are next derived.

Fig. 1 Effect of contact time on the equilibrium adsorption capacity of different initial concentration of Myoglobin at 30 °C, CA-cellulose viscopearl membrane dose of 0.5 g/L at 1000 mg/L Fig. 2 Effect of contact time on the equilibrium adsorption capacity of different initial concentration of Myoglobin at 30 °C, CA-cellulose viscopearl membrane dose of 0.5 g/L at 500 mg/L.

Open image in new window Fig. 4 Effect of pH on the equilibrium adsorption capacity of MB onto MLP (C 0 = 50 mg/L, W = 0.25 g, V = 200 mL).

Whilst the adsorptive process was very quick (up to 88% of equilibrium capacity could be achieved within 2 min), the adsorptive capacity of the adsorbent was very low (2 mg g−1) compared with activated carbons.

Meanwhile, the paper will evaluate the model with VISSIN, and then demonstrates the feasibility and effectiveness of capacity equilibrium model.

Although the percentage removal of metal ion decreases, the equilibrium biosorption capacity of the adsorbent increases with increasing metal ions concentration.

The value of equilibrium adsorption capacity (q e) and the percentage removal of dye as a function of adsorbent dose are presented in Fig. 5.

More fundamentally, the support effect appears to correlate with the electronegativity of the support cation, which is proposed to have influence upon the rate of methoxy decomposition through hydride abstraction and on the steady-state equilibrium adsorption capacity of methanol to surface methoxy intermediates through the basicity of the bridging V O support bond (the adsorption site).

This paper describes the effect of organic fouling on activated carbon, as well as the influence of pH and dissolved oxygen on the equilibrium adsorption capacity of the carbon.

The design of adsorber units is mainly dependent on the equilibrium adsorption capacity of the sorbent in the working conditions.

The Freundlich-type multicomponent isotherm was applied successfully to describe the equilibrium adsorption capacity of gold or silver in the presence of a single organic foulant.