Sentence examples for equal strain from inspiring English sources

Since Barron's work, a little contribution has been done to the equal strain model.

The equal stress cycle loading and unloading and equal strain monotonic loading methods were adopted.

Young's moduli were assessed at equal strain levels (1%, 2% and 3%), as well as at peak strain.

The analytical solutions proposed in this paper are more consistent with the numerical results than the analytical results obtained employing the equal strain condition.

The consolidation theories for drain wells under equal strain condition are often used in the design of ground treatment by PVDs.

In an isotropic sheet the thickness and width show equal strain, but, if the grains of the sheet are oriented properly, the thickness will shrink only about half as much as the width.

A 1 s hold time between equal strains of ϵ=0.25 was sufficient for appreciable strain induced precipitation, although 40% static recrystallisation occurred during the hold time.

Both the finite element calculations and the experimental results showed that under the full board width support conditions the bending of the component board is more uniform and different component locations experience more equal strains as compared to bending under the conventional 4-point support conditions.

In addition, from Fig. 11a for MEM-1 0, MEM-1 0dinalongitudinale loaded and unloaded half U-sections got barscally equal strains.

In addition, our measured toughness decreases instead of increases with composition in an opposite trend to that predicted by the equal-strain model.

Both thermal-mechanical and isothermal fatigue tests were finished with the equal mechanical strain ratio of Rε = −1 and cycle period of 120 s.