Sentence examples for enhance machining from inspiring English sources

This paper proposes an approach for a 3D-Piezo Compensation Mechanism unit that is capable of fast and accurate adaption of the spindle position to enhance machining by robots.

A common template would enhance machine comparability of definitions.

"Similar to how our single API have lowered their costs, this will help them enhance machine learning but with much lower cost," he says.

Dichroic filters designed to enhance machine vision devices were used because they are much less expensive than epifluorescent microscope filter sets.

Two advanced machining methods as thermally enhanced machining and ultrasonic assisted machining has been considered in many studies, recently.

While it is observed that thermally assisted machining reduces the cutting forces, it is found that the process has a deleterious effect on tool life because the dominant wear mechanism associated with diffusion is exacerbated during thermally enhanced machining.

Experimental results also demonstrate that processing time 'with' a high-frequency vibration assistance of 1.6 KHz is about 75 80% that of the time 'without' high-frequency vibration, validating inverse micro w-EDM with high-frequency vibration assistance enhancing machining efficiency of microstructure arrays.

Experimental results show that for a similar depth of 11 μm, the use of SLEMM instead of TMEMM leads to a reduction in micro-dimple diameter from 124.3 to 109.0 μm and a sharp increase in etch factor from 0.9 to 2.5, confirming that SLEMM should be able to enhance the machining localization and machining accuracy of micro-dimples.

Finally, it is verified that the tube electrodes with improved inner shapes can be used to further enhance the machining performance.

To improve the flushing condition and further enhance the machining performance, improved tube-electrode structures, obtained by varying the inner diameter and inner shape, are introduced.

The result shows that it can enhance the machining quality in five-axis flank milling in both simulation and practical operation.