Sentence examples for engineering conditions from inspiring English sources
On the same day, Interior Secretary Ken Salazar published a set of detailed safety and engineering conditions that industry must satisfy before drilling could resume.
In combination with practical engineering conditions, the solutions of these key techniques are given.
Step 4, taking account of the constraints imposed by engineering conditions in Chinese under-ground coal mines, it is assumed that L1 = 1 m.
While, for wells with a short history, these parameters can refer to analogous wells that have a long history and similar geological and engineering conditions.
However, the performance of refracturing is highly dependent on the geological and engineering conditions, so selecting economic refracturing candidates presents a key problem (Reese et al. 1994).
Through the simulation on the heating reactor, the method of burn-up characteristic extraction is verified under engineering conditions.
The DSC devices exhibited a trend of performance saturation from an approximately 15 μm TiO2 thickness with 10−7 mol/cm2 dye-mass, which was estimated to be a maximum engineering condition required for effective charge-transfer kinetics in this investigation.
An efficient global-optimization algorithm, particle swarm optimization (PSO), is introduced to analyze the performance (efficiency, accuracy and stability) of the two methods successfully in a tunnel engineering condition.
The result indicates time delay feedback controller may work well on this system, but the selection of a proper time delay and its coefficient may depend on the engineering condition.
Results obtained via numerical experimentation show that in a tunnel engineering condition the locations of MS sources with PSO algorithm could be accurately obtained using both the two location method.
The aim of this work was to develop an advanced finite element model of a plate mill, including the major mill components, the mill set-up engineering condition, the profile of the mill rolls (incorporating ground-on profile, thermal camber and wear effects), the stock geometry and the stock material properties, allowing detailed study and simulation of plan-view shape evolution.
