Your English writing platform
Discover LudwigExact(10)
Your only requirement is to be able to fit an open end wrench on a bolt without bleeding.
Be certain to purchase one designated for a musket size nipple, or use a small open end wrench.
Here are some: Strap bolts, usually requiring a 1⁄2 or 9⁄16 inch (1.3 or 1.4 cm) or 12, 13, or 14 mm open end wrench.
Also needed is a good 18" pipe wrench and about a 24" box end wrench large enough to use as a pry bar over the handle of the pipe wrench.
While an assistant below uses the impact wrench with a 15/16" deep impact socket, simultaneously from above apply reverse pressure on the socket with the pipe wrench and box end wrench for leverage.
Gather wrenches, including 12mm, 13,mm, 15mm, 17mm, and a 5/16 inch box end wrench, along with a pry bar, and a pair of locking pliers like Vice Grips.
Similar(50)
Basic wrenches, included end wrenches, sockets, and ratchets are a must have, and you may find you also need screw drivers, nut drivers, pliers or other tools for removing compression clamps, and a gasket scraper.
The open-end wrench may have rectangular slots on one or both ends.
Because the sides of the box are thin, these wrenches are suitable for turning nuts that are hard to reach with an open-end wrench.
Screw it in place clockwise and snug it down with the socket or open-end wrench.
This requires a 21mm box-end and a 10mm box-end wrench to keep the ball end from spinning.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com