Sentence examples for end of the pulse from inspiring English sources
The concept of a dead-time compensated prefocused pulse has been introduced to EPR with a self-refocusing of 200 ns after the end of the pulse.
Four dimensionless operating parameters of pulse tube refrigerator are needed to express the enthalpy flow at the cold end of the pulse tube.
In a well conditioned beamline for a 15 MW beam pulse the duct liner temperature and pressure were observed to establish an equilibrium 5 s into the pulse and remain in a steady state to the end of the pulse.
The effective electron temperature peaks at the same time independent of position in the discharge, which indicates a burst of high energy electrons at the end of the pulse.
What's more, the hydrodynamic behavior of the target under direct heating indicates that the beam parameter design for HEDP research should come to a compromise, which means, for example, with higher intensity or smaller focal spot, the beam pulse length must be compressed short enough to avoid the target dispersal before the end of the pulse.
The baseline magnetic fields and pulse lengths can be provided by wedged BeCu/OFHC TF coils and OFHC poloidal field (PF) coils that are pre-cooled to 80 K prior to the pulse and allowed to warm up to 373 K at the end of the pulse.
A parallel configuration of the two pulse tubes is used with the warm ends of the pulse tubes located at ambient temperature.
Returns from the front and rear ends of the pulse determine the size of the elementary surface element,.
Response currents are sampled before the potential pulse and at the end of the potential pulse.
Experiments revealed that the plasma parameters reached a steady state at about 500 μs after the RF pulse ON and they shrunk gradually after the end of the RF pulse.
The gain at the start (GS) and at the end (GE) of the pulse were then extracted from the linear regression of the AP frequency vs current plot (right panel).
