Sentence examples for end of a screw from inspiring English sources

These tools consist of a hollow steel tube with sharp threads like the end of a screw and a finely honed open cutting tip.

"If it gets very cold I can feel where some of the metal is, and on my chin, if I push it, I can feel the end of a screw".

Mild pain over the elbow was noted in one patient, however, it was felt to be a result of the prominent end of a single screw.

In particular, this model shows that the system is unstable when the moment of inertia J1 of a mass clamped to the free end of the screw is in a range between two boundary values J1min and J1max.

The other type, the screw-actuated lift, is either electrically or hydraulically driven and is coupled to a vertical screw through a nut in which the upper end of the screw is connected to a portion of the stage floor.

This increases the screw diameter to increase the holding force, and pushes the leaflet in the distal end of the screw to create a "claw" shape that increases the contact area with the bone, also increasing the holding force.

Hold the hacksaw vertically and slowly cut the end of the screw to create a groove.

Use a screwdriver (or just the screw) to make the holes through the grip tape, the board and through the trucks, then put the bolts into the the board, and put the bolt onto the end of the screw, screw it in while holding the bolts with a clamp or a wrench or something.

The material is heated, consolidated and extruded through a die in front of the end of the screw in one single continuous process.

One end of the screw bar was attached to the tower by a hexagonal nut, the other end held a rubber ring (3 cm diameter) against the skull.

Make sure the corn cob holder is thinner than the flat end of a small to medium threaded screw.