Sentence examples for end of a scan from inspiring English sources

A fully reconstructed dataset can therefore be visualized shortly after the end of a scan enabling quick beamline and experimental parameter assessment as well as image quality confirmation.

For the unidirectional and zigzag scan strategies, at the beginning and end of a scan track, laser power is usually unstable and scan speed is gradually reduced, which tends to result in a relatively higher laser energy input and defect formation [20, 56].

First, different rotations (3, 4, 5 and 6°, Fig.  3, top row) were applied, simulating the 'napping effect' at the end of a scan.

At the end of a scan cycle, a 3D data cube is obtained that provides a fluorescence spectrum at each 2D spatial location in the sample.

11 A negative end-of-treatment scan has a high negative predictive value for relapse, but does not predict for better survival.

Gas is injected at variable location in the SOL through the end of a reciprocating fast-scanning probe.

At the end of each scan line, a synchronization impulse was generated and recorded along with the optical intensity signal.

This means that when interpolating data at and beyond the top axial end of the volume grid, missing data is replaced with data from the low axial end of the same A-scan.

Six patients progressed on treatment according to standard criteria (three progressed on the interval scan after receiving carboplatin and paclitaxel, and three had stable disease on the first scan, but showed progression by the end of treatment scan) giving an overall progression rate of 14%.

A technician applies a small electric charge to the pool water using batteries, and then uses a sensor attached to the end of a telescopic pole to scan the interior for any area where the charge in the water is "going to ground" by leaking through the liner.

This instrument utilizes a tactile sensing system, in which a probe (typically composed of silicon nitride) is attached to the end of a cantilever and raster scanned in x- and y-directions across a specimen through the activity of a piezoelectric tube to which the cantilever assembly is mounted (Montigny et al. 2006).