Sentence examples for end hook from inspiring English sources

It is believed that an embedment length of 10 mm which is roughly twice of the length of the end hook is efficient to achieve full mobilization and straightened end hook.

The percentage contribution of the end hook and frictional resistance on the total pullout work is summarized in Table 5.

Nevertheless, initial increase in pullout load can be observed due to the progressive deformation of the second plastic hinge in conjunction with straightening of the end hook.

Nevertheless, the straightening of the end hook of both types of fibres embedded in matrixes with 0.20 and 0.25 W/B ratios are similar.

To get better understanding of the contribution provided by the end hook to pullout behaviour, a quantitative account for hook mechanisms has been adopted.

As can be seen from Fig. 11, the end hook contribution is nearly being finished at 4.78 mm for the 3DH1 fibre and 5 mm for the 3DH2 fibre, which corresponds to decay of pullout load due to complete deformation and straightening of the end hook.

After you have a couple of courses laid on both ends, hook a line up at both ends so it lines up with the very top of the bricks.

Damaged ties failed by yielding and, in some cases, subsequent straightening of the end hooks.

Open image in new window Fig. 11 Example showing the contribution of the end hooks component and frictional resistance to the overall pullout behaviour of 3DH2 fibres.

To enhance the bond strength performance of the fiber without change the concrete mix properties, it is necessary to find sophisticated form for the fiber such as end hooks.

In the frame of the research different bar reinforcements (2∅6 mm and 2∅12 mm) and three types of fibres' configurations (two straight with end hooks with different ultimate tensile strength and one corrugated) were used.