Sentence examples for end deflection from inspiring English sources

The proposed designs provide the free end deflection nearly twice as the conventional rectangular beam.

Thereafter, the end deflection is calculated as a function of temperature.

Moreover, there are some constraints in this problem which are bending stress in the beam ((alpha )), the beam deflection ((beta )), buckling load on the bar (BL), the end deflection of the beam ((delta )), and side constraints.

The minimum weight is calculated subject to the provisos that: (i) the end deflection attains a specified value; (ii) the power consumed is less than the upper limit of the supply; and failure is averted by (iii) face/core yielding and (iv) face/core buckling; (v) the operational frequency of the panel achieves a specified limit.

While the end deflections of up to 41 mm were easily achieved from smart E-glass/epoxy beams, the limited end deflections were observed from the smart carbon/epoxy beams due primarily to our inability to insulate the nitinol wires.

Increasing end deflections, from 1 to 8 μm, were applied to a series of similarly oriented cantilevers to show the progressive development of deformation.

Free-end deflection of a composite plate with different location of mechanical load was studied analytically and experimentally.

The simulation results show that the free-end deflection is strongly dependent on the kinetic energy of the incident ions.

The evolution of free-end deflection with respect to the number of incidences is also dependent on the incident energy.

The free-end deflection of the MCL was investigated by considering different cases like a cylindrical droplet, a spherical droplet centered on the MCL and a spherical droplet arbitrarily positioned on the MCL.

Front-end diversion or deflection strategies are the most cost-effective mechanisms for reducing preadjudication expenditures that arise from arrest, prosecution, and detention.