Sentence examples for enabled the maximum from inspiring English sources

When the MAC layer video adaptation is enabled, the maximum queuing delay allowed for video packets is 500ms and the tolerated queuing delays for the high, medium, and low priority video categories are 40, 250, and 500 ms, respectively.

Extensive track re-canting has enabled the maximum line speed to be increased to 50 mph.

Furthermore, introduction of redox balancing module to optimize redox state depending on the enhanced carbon flux enabled the maximum production of n-butanol from galactose.

Needle insertion inside the fibroid was carried out without any problems and enabled the maximum opening of the hooks (as visualized by US with two orthogonal incidents).

An important problem of the optimization of the PTM chemical composition enabling the maximum densification of a porous specimen with the minimum possible shape distortion is solved.

In order to eliminate failure modes & enable lightweight structures, it is essential that the Computer Aided Engineering CAEE) toolset used in virtual development is accurate, enabling the maximum work to be extracted from the material whilst the integrity of the structure is maintained.

The flexibility of the icosahedral Au13 cluster allows it to readjust so as to enable the maximum orbital overlap between the Au13 clusters and CO2, making the stabilization of CO2 feasible.

The Traffic Signal Synchronization is a traffic engineering technique of matching the green light times for a series of intersections to enable the maximum number of vehicles to pass through, thereby reducing stops and delays experienced by motorists.

In order to develop a cost-effective integrated construction process that will enable the maximum capability of automation of components for transport infrastructures using polymer based materials (carbon fiber, glass fiber, etc).

Heat transfer measurements show that the redistribution of water to form an additional lower viscosity carrier layer while increasing the solids concentration of the upper layer or layers enables the maximum drying rate, for which drying-air induced surface disturbances are acceptably small, to be increased with significant commercial benefits.

Our goal is to enable the maximum use of facilities while maintaining a cost neutral impact on the college.