To confirm that Ubx and Abd-A play the same role in CCAP-EN specification, we misexpressed abd-A (elav-Gal4 UAS-abd-A 20-10-1) and, surprisingly, found that all the CCAPs were lost (Fig. 3E-E′).
Moreover, the properties of the produced S. foetida methyl esters and all the measured properties are within the limits of ASTM D 6751 and EN 14214 specifications.
This paper provides recommendations for how best to conduct the test, and proposes an alternative test method to that given in the EN 15512 Specification.
Both monotonic and cyclic responses showed that the additional bolts (and welds) significantly enhanced the bearing capacities and deformability of the connections, though the initial stiffness and equivalent stiffness (i.e., according to the EN 15512 specification) showed little improvement.
Experimental results showed that a mixture of 13.7 mol% n-heptane, 42.9 mol% iso-octane, and 43.4 mol% toluene is a satisfactory surrogate for a European unleaded gasoline with a research octane number of 95, conforming to the EN 228 specification.
The experimentally determined (65.7) and the predicted (70.64) IVs were below the EN 14214 specification (120 max) and suggest good oxidative stability of the transesterified oils from strain 3589.
Because the quality parameters of Jatropha biodiesel are within the European EN 14214 specification and the emission parameters of sulfur and particulate matter are 80% lower than those of mineral diesel [ 4], Jatropha is emerging as a potential biofuel plant.
The new European standard (EN 14961) fuel specifications give a broad spectrum of quality levels.
AV, IV and PV of the biodiesel sample which was stored were within the limits in European biodiesel specifications (EN 14214).
In this study, a ceramic membrane with a pore size of 0.02 μm was used to purify crude biodiesel to achieve biodiesel product that meet both ASTM D6751 and EN 14241 standards specifications.
