Sentence examples for elongated crack from inspiring English sources

As discussed in the crack blunting model shown in Figure 8, the elongated crack features rather small stresses in the vicinity of the crack.

The system elongates in the loading direction, and the shape (morphology) of the crack undergoes a dramatic transformation from mode I, to a circular hole, to finally an elongated crack aligned with the direction of loading (see schematic depicted in Figure 6C and Figure 8).

These additives facilitated full densification at temperature as low as 1700°C, the formation of an amorphous phase at the grain boundaries to enhance intergranular fracture, and the promotion of an elongated microstructure to enhance crack deflection and crack bridging.

The elongated film with cracks are mostly recovered to its original dimension after the strain is released, but indistinct crack lines are left as seen in Figure 2f.

The material with the elongated cavities of the crack front is parted by the propagating crack and immediately sheared by ≈ 60° and left lying parallel to the crack flank surfaces.

Microscopically, the large residual stress essentially results in the formation of flaws including strain contrast and transgranular cracks in elongated β-Si3N4 grains.

Soft-shells are more elongated, and you can easily crack them open with your fingers; they are steamed whole or shucked and deep-fried.

The players attempt to stay upright and maneuver their elongated sticks to get a crack at the ball.

Regular arrays of micron-sized elongated ridges formed parallel to the crack growth direction in the near-threshold fatigue crack-growth regime at elevated temperatures.

Typically, the interphase has to exhibit features from both the matrix (anisotropic) and the fibres (isotropic) so that to reduce the discontinuity effect at the fibre/matrix contact, and should also exhibit features (elongated porosity) that promote multiple micro-cracking from the primary cracks, so that to somewhat absorb part of the fracture energy.

In UP, the collapse pattern and morphology of unconnected sinuous elongated pits that follow the polygon crack are similar to underground melting in Bylot Island (Nunavut, Canada).