Sentence examples for elements of the pressure from inspiring English sources

The low-wavenumber elements of the pressure spectrum under the plate are determined, and it is found that the surface pressure spectrum has considerable structure which is not predicted by simple bending plate theory.

Several sets of non-linear finite element simulations of the pressure loading process were then conducted.

The compatibility condition for multiscale finite element spaces of the pressure and velocity is not required in the least-squares mixed form.

The impact loading condition (488 J impact energy), including the autofrettage pressure (107 MPa) and service pressure (70 MPa), was successfully imposed on the finite element model of the pressure vessel.

But he would be in charge of one of the other major elements of pressure: the huge buildup of American naval might, antimissile capability and special operations in the Persian Gulf.

To prevent the containment vessel from cracking or blowing open altogether, releasing a cloud of radioactive smoke into the air, the plant's operators vented some of the steam and hydrogen, bringing the pressure down to a more comfortable 5.5 atmospheres.Steam, contaminated with some radioactive elements, flowed out of the pressure vessel and into the larger containment vessel that surrounds it.

The stiffness of the viscoelastic element was 10 times the stiffness of the static element, and the decay period of the viscoelastic element was 2% of the pressure hold time.

Figure 1b shows another important parameter for both EDR and separatrix, the local degree of electron nongyrotropy (D_{text{ng}} = 2sqrt {mathop sum nolimits_{ij} N_{ij}^{2} } /Trleft( {P_{e} } right)) [N ij is the nongyrotropic elements of the full electron pressure tensor (varvec{P}_{e}), see Aunai et al. (2013)].

Finally, the scaling relation is used to develop the design relations needed to determine the number of mixing elements, the pressure drop incurred and the Péclet number of operation to achieve a given mixture uniformity within a specified mixing time.

The effect of feed Silt Density Index (SDI) and number of the RO elements in the pressure vessel were investigated here.

The first two elements in the pressure vessels are of "high rejection" type and the five following ones are of "standard" type.