This is possible, however, only if proper techniques and methods are used to deal with the electromagnetic, electrode-polarization, eye-blink, muscle, auditory and other artifacts.
The design of a novel multi-electrode electromagnetic flowmeter, which provides nine conventional electromagnetic flowmeters housed in a single body, has been used in adverse flow conditions immediately downstream from a header tank.
An electromagnetic glassy carbon (GC) electrode was employed to collect the magnetite particles (0.25 10 mg dm−3) from the suspension solution.
The nanogaps show a strong absorption of light in the visible and near-infrared regions due to their localized plasmon resonances, i.e., once the frequency components of the incident LED light match the oscillation frequency of the free electrons coupled with the electromagnetic field on the electrode tips, the localized surface plasmon resonance around the gap is excited.
Under the very strictly controlled conditions of the in vitro brain slice, we were only able to see clear frequency changes in our local field potential recordings (Fig. 9) after going to the utmost lengths to suppress experimental noise (such as electrode drift, electromagnetic interference, vibration-induced artifacts, ground loops).
Each RFA system consists of three components: a generator (the source of electromagnetic energy), an active electrode (placed into the target tissue and depositing the energy), and grounding pads (to dissipate the returning current).
It can be seen that stronger deviations from this simple equation are observed for PC-DSCs, for which the electromagnetic power within the electrode depends strongly on the relative position of the Bragg peak with respect to the absorption band of ruthenium dye.
In their work "Electromagnetic receiver with capacitive electrodes and triaxial induction coil for tunnel exploration," Kai et al. (2017) introduced capacitive electrodes and triaxial induction coils that help avoid these limitations.
Riga plate is an electromagnetic surface in which electrodes are assembled alternatively.
Those diode tubes maintained an electromagnetic current between two electrodes, an anode, which holds a positive charge, and a cathode, which holds a negative charge.
The experimental result shows that the new electrode impaired the electromagnetic acceleration slightly.
