Sentence examples for electrolytic plating from inspiring English sources

Micro- and nano-sized SiC particles were codeposited with nickel by electrolytic plating from a nickel sulfamate bath and the effects of plating parameters such as pH of the plating bath, SiC content in the plating bath, and stirring speed on the deposition behaviors of Ni SiC composite coating layers were studied.

In this work, nickel/carbon hybrid fibers were prepared by the electrolytic plating on carbon fibers in order to improve electric conductivity of the carbon fibers; the effects of nickel content and coating thickness on the electric conductivity of the fibers were studied.

Within the chamber, an electrolytic plate produced oxyhydrogen.

Once the RoboBee swims to the surface, an electrolytic plate in the chamber converts water into oxyhydrogen, a combustible gas fuel.

As RoboBee swims to the surface, an electrolytic plate in the chamber converts water into oxyhydrogen, a combustible gas fuel.

In addition to its little water wings, the RoboBee has a little electrolytic plate that splits water into hydrogen and oxygen, then mixes them together for an easily combustible mixture.

The mass transfer enhancement and pressure drop properties of an electrolytic parallel plate cell with a cloth separator in contact with the electrodes has been studied.

LubricaThesewould be an easy way to solve the packages referred areve however, lubricommonlyerations should be avoided as these kinds of packages are for food purposes.

Consequently in the second part, tribological characterizations were carried out in order to determine the alternative potential of NiCrBSi coatings compared to electrolytic hard chromium plating, in applications to resist wear.

Then, chemical characterization (corrosion in salt spray test) was carried out in order to determine the alternative potential of dry coatings, especially NiCrBSi coatings, compared to electrolytic hard chromium plating.

The results indicate that the presence of the coating gives rise to a significant increase in the fatigue strength of the substrate and therefore, that from the fatigue behavior point of view this coating could be a feasible replacement of electrolytic hard chromium plating in aircraft applications.