Sentence examples for electrode regeneration from inspiring English sources

b Electrode regeneration.

An optimal control method, voltage polarity relay, accomplishes simultaneous urea oxidation and electrode regeneration.

This research explored the occurrence of re-adsorption that may impose negative impact on electrode regeneration in capacitive deionization (CDI).

CDR is a promising method for water purification, which offers advantages of energy saving and simple electrode regeneration.

This allows electrochemical monitoring of nitric oxide release from living cells and subsequent visible light-induced electrode regeneration, demonstrating great potential of this renewable electrodes in biosensing.

During the regeneration of the electrode, it was shown that the application of an optimal electric potential increased the quantity of Ca2+ desorbed after 30 min by approximately 60% for an uncoated pair of electrodes and 90% for a coated pair as compared with electrode regeneration performed under no applied potential.

Unlike the conventional capillary electrophoresis, the modified microchannel design helps in storing the separated thiols in different reservoirs for further analysis, if required; and also eliminates the need of electrodes regeneration.

Electrode surface regeneration was performed before each experiment by polishing it with a smooth wet filter paper until a shiny and clean electrode surface was obtained.

Unique to this system is that ions do not adsorb onto the opposite electrode during regeneration due to the inherent surface potential of the nanoporous oxide which repels the ions under the conditions employed for these tests.

We report a new concept for capacitive deionization with simple and cheap porous bipolar intermediate graphite electrodes which is operated continuously by constant or alternating polarity without any down time for electrode saturation, regeneration and rinsing steps and certainly without any permselective ion exchange membranes.

An almost fully reversible ionic removal (ca. 90% recovery) was obtained for this electrode material when regeneration was carried out at zero-voltage conditions.