Sentence examples for electrode connector from inspiring English sources

One end of the optical fiber was fixed to an optical ceramic ferrule (inner diameter = 220 µm) and stabilized onto the electrode connector using epoxy resin (Fig. 1B).

Two pairs of uninsulated silver microwires (diameter 100 μm) were soldered into the electrode connector as the reference and ground electrodes, respectively.

Approximately 2 mm of the formvar coating was removed from one end of each microwire by brief exposure to a flame, and each microwire was soldered into separate slots of a standard electrode connector (Omnetics, USA).

Holes were cut in the bag to allow connection of the EEG cables to the electrode connector and placement of the thermistor rectal probe (Yellow Springs Instr., Yellow Springs, OH).

A short-circuiting of the thermovoltage via the reference electrode connectors could be ruled out due to their input resistance of >10 Ω.

Measurement of the electrochemical parameters and the subsequent analysis were performed using a µStat400 Biopotentiostat with a 4-electrode connector from DropSens, Spain.

Since the input resistance of the counter electrode (CE) connector versus the working electrode (WE) connector of the POT/GAL 30V 2A test interface is specified as virtually 0 Ω, the thermovoltage was short-circuited by the impedance analyzer.

In order to provide more stability to the assembly on the skull for chronic recording, two additional small holes were drilled for mounting jeweller's screws that were also framed with dental cement and glued together with the electrodes and the connector.

A bipolar electrode linked with a connector was chronically implanted targeting the left IL-PFC.

Nevertheless, the most efficient way of grounding was found by introducing a grounded gold electrode into a T-connector (M-540 from Upchurch, Oak Harbor, WA, USA), that was mounted between the column outlet and the inlet into the ESI source using two short pieces of 100 μm i.d.

Wires from the electrodes ran to connectors on the patient's head, which doctors could then use to plug the patient into the computer system and robotic arm.