Sentence examples for electrode buffer from inspiring English sources

Tris glycine (pH 8.3) was used as electrode buffer.

Tris glycine buffer (pH 8.3) containing 0.1% SDS was used as electrode buffer.

Samples were mixed in a 2 1 ratio (v/v) with sample buffer (20% glycerol (w/v), 0.0025% bromophenol blue in destilled water) and electrophoresis performed at 20 mA for 2 h in 0.05 M Tris-HCL/0.38 M glycine electrode buffer (pH 8.3).

BaTiO3 film deposited on the composite film exhibits an increased remnant polarization due to release of interfacial charge accumulation, which indicates that the present conductive composite layer can be used as a promising electrode buffer layer in preparing ferroelectric film devices.

For Western Blotting, gels were washed thoroughly with electrode buffer without Triton X-100 for 2 h (each wash of 200 ml, 10 min) on a slowly rocking platform to remove Triton.

at 25°C in an electrode buffer (25 mM Tris, 192 mM glycine, and 0.1% [wt/vol] SDS) with the following settings: step 1, 2 W/gel, 25 min; step 2, 17 W/gel, 4 h.

Therefore, it is concluded that the space between tiles in the patterned Si electrode buffers the volume change of Si during the charge-discharge process and partially disperses the stress generated in the Si electrode.

0.1M orthophosphoric acid and 0.1M sodium hydroxide were used as anode and cathode electrode buffers respectively.

The electrode buffers in upper and lower chambers consisted of 0.35 M β-alanine-0.14 M acetic acid (pH 4.5).

The loaded IPG strips were rinsed, mounted on a cooled ceramic plate and connected with the electrodes via water-wetted paper bridges to the electrode buffers.

In order to facilitate the flow of electrons and holes to opposite electrodes, the buffer layers and electrodes are selected according to their work functions and compatibility with adjacent layers in terms of materials processing and fabrication.